REBUILD KIT, CARBURETOR, MIKUNI BST40 W/O TPS, KTM LC4. This contains the same parts as the 584.31.099.000 GASKET SET MIKUNI BST40-225 except the diaphragm, but plus the float needle, which normally only comes as part of 584.31.020.000 NEEDLE VALVE 2,8MM (usually no need for the assembly, as the seat goes bad infrequently), and throttle blade screws. Full list of parts contained in the kit: float needle, needle seat o-ring, cold start enrichment feed pipe o-ring, float bowl gasket, main jet access plug o-ring, pilot screw o-ring, slide guide o-ring, cold start slide retainer to cable seal, two felt throttle shaft seals, two stainless steel flat hexalobular throttle blade screws and instructions. All o-rings in this kit are FKM.
All items are in stock unless otherwise noted and ship immediately; i.e. if you are able to put the items in the cart and complete checkout, it means that we have the items in stock and will ship them the same (or rarely, next) business day if the order is placed before 13:30 Central Time.